Brayco 1721 Plus Oil 4 pounds

Brayco 1721 Plus Oil 4 Pounds:

Castrol Brayco 1720 Plus Series Oils are clear, colorless low molecular weight perfluoroether oils with added corrosion preventative. The oils are chemically inert to virtually all chemicals, and safe to use in direct contact with oxidants such as LOX/ GOX and chlorine. Brayco 1720 Plus Series Oils are nonflammable and non-toxic. Castrol Fluoroclean™ X100 and Castrol Fluoroclean™ HE can be used to clean this product. Refer to the data sheets for Fluoroclean X100 and Fluoroclean HE for information regarding these products.

Applications

Brayco 1720 Plus Series Oils are intended for use as gear, pump, and lubricating oils where direct or indirect contact with aggressive chemicals, oxidants, and where low temperatures are routine. The Brayco 1720 Plus Series Oils can also be used as vacuum pump oils in operations requiring vapor pressures as low as 10-4 torr. Brayco 1720 Plus Series Oils offer special corrosion protection to iron, copper and a variety of metals. Perfluorinated fluids, in general, exhibit excellent shelf lives due to their intrinsic inertness.

Characteristics

 

TEST METHODDESCRIPTIONRESULT
1721+1723+1724+
D 287 Specific Gravity @ 16/16°C (60/60°F) 1.865 1.890 1.901
D 445 Kinematic Viscosity, cSt
@ 100°C (212°F)
@ 40°C (104°F)
@ -40°C (-40°F)
@ -54°C (-65°F)
1.64
6.34
2800
55,000
5.45
32.4
100,000
ND
9.62
70.2
ND
ND
D 2270 Viscosity Index ND 102 116
D 97 Pour Point, °C (°F) -69 (-95) -51 (-60) -42 (-45)
D 972 Evaporation Loss, % wt
22 hrs @ 60°C (140°F)
22 hrs @ 120°C (248°F)
5.5
95
0.58
14
0.49
18
D 2266 Four-Ball Wear-Test, AWSD, mm
600 rpm, 2 hrs, 75°C (167°F), 40 kgf
0.68
0.38
0.62
D 2783 Four-Ball EP Weld Point
Weld Point, kgf
Load Wear Index
315
75
315
85
315
95
Knudsen Vapor Pressure, torr
100°C (212°F)
20°C (68°F)
1 x 10-1
1 x 10-1
1 x 10-1
1 x 10-1
1 x 10-1
1 x 10-2
D 1331 Surface Tension
20°C (68°F), dynes/cm
19
21
21
D 2512 LOX Impact Sensitivity
20 drops, 1100 mm
Pass
Pass
Pass

Temperature Range:

Brayco 1721+ -54°C to 93°C (-65°F to 200°F)
Brayco 1722+ -34°C to 149°C (-30°F to 300°F)
Brayco 1723+ -34°C to 163°C (-30°F to 325°F)
Brayco 1724+ -20°C to 177°C (-20°F to 350°F)

Limitations:

Brayco 1720 Plus Series Oils are compatible with all commonly utilized materials, plastics, and elastomers. Brayco 1720 Plus Series Oils may be adversely affected by Lewis Acid Catalysts such as AlC13 at elevated temperatures. Newly exposed rubbing surfaces of aluminum, magnesium and titanium may react with Brayco 1720 Plus Series Oils under certain conditions. Such systems should be thoroughly evaluated. Surfaces must be well cleaned of organic rust inhibitors prior to oil application to insure proper lubrication.

Removal of unwanted grease from grease applied surfaces:

The composition of this product is a mixture of small PTFE particles (which won't dissolve in anything) and a perfluorinated polyether liquid. We have found that Castrol® Fluoroclean™ HE is an effective solvent for the liquid component of the formulated composition and aids in the removal of the grease from places where it is no longer needed or wanted.

Packaging:

Brayco 1720 Plus Series Oils are available in 4 pound (1 quart), 16 pound (1 gallon) bottles and 75 pound pails.