Castrol Braycote Micronic 700 - 2 oz Disposable Polypropylene Syringe
| Availability | Contact for Availability |
|---|---|
| Item | 05195-AB |
Castrol Braycote Micronic 700 - 2 oz Disposable Polypropylene Syringe
Castrol Braycote Micronic 700 is a smooth, buttery, translucent off-white colored, NLGI #2 grease. It uses Castrol Brayco 815Z as the base fluid and a tetrafluoroethylene telomer as the gelling agent. This product was specially formulated to provide exceptional anti-wear properties, in combination with ultra low outgassing and extreme temperature use capabilities. Braycote Micronic 700 exhibits superior chemical resistance, and is non-toxic, nonflammable, chemically inert, and does not use any chlorofluorocarbons (CFC's) during product manufacture. It has excellent lubricating properties, good shear stability, low acute toxicity, and promotes extended rolling element cycle lives. Castrol Fluoroclean™ X100 can be used to remove this lubricant. Refer to the data sheet for Fluoroclean X100 for information regarding this product.
Application:
Braycote Micronic 700 is designed to operate in the presence of fuels, oxidizers, and in applications of deep space vacuum at low temperatures. It is used in gears, ball and roller bearings, electrical contacts, and "O" rings. This grease is highly recommended for applications where temperature extremes and/or low vacuums are routine, such as cryogenic coolers, FLIR, laser optical systems, or hostile chemical environments. Perfluorinated greases, such as this product, exhibit excellent shelf life due to their intrinsic inertness.
Characteristics:
| TEST (ASTM) | DESCRIPTION | RESULT |
|---|---|---|
| D 1403 | Penetration, 25°C (77°F), mm-1
|
285 285 |
| FTM 321 | Oil Separation, 30 hrs @ 204?C (400?F), % wt Evaporation Loss, 22 hours @ 204 C (400 F) % wt |
12.0 0.14 |
| FTM 5309 | Copper Strip Corrosion
|
1b |
| D 2265 | Dropping Point, °C (°F) | 240 (464) |
| D 2596 | Four-Ball Extreme-Pressure Weld, kgf | 800+ |
| E 595 NASA SP-R-0022A |
Vacuum Stability Test 24 hrs, 125°C (257°F), 10-6 torr
|
0.0 0.0 0.0 |
| D 1478 | Low Temperature Torque, g.cm
|
585 260 1040 650 |
| D 2512 (MSFC 106) |
LOX Impact Sensitivity 20 drops, 100 mm |
Pass |
| D 3336 | High Temperature Bearing Performance, 204 C, hrs | 553 |
| Base Oil Properties | ||
| D 287 | Specific Gravity @ 16/16°C (60/60°F) Pounds per Gallon @ 16°C (60°F) |
1.8531 15.430 |
| D 445 | Kinematic Viscosity, cSt @ 99°C (210°F) @ 38°C (100°F) @ -54°C (-65°F) |
45 148 10,855 |
| D 2270 | Viscosity Index | 350 |
| D 97 | Pour Point, °C (°F) | -72 (-100) |
| Knudsen | Vapor Pressure, torr
|
-72 (-100) |
Temperature Range:
-80°C to 204°C (-112°F to 400°F)
Limitations:
Braycote Micronic 700 is compatible with all commonly utilized materials, plastics, and elastomers. It may be adversely affected by Lewis Acid Catalysts, such as AlC13,, at elevated temperatures. Newly exposed rubbing surfaces of aluminum, magnesium and titanium may react with this product under certain conditions. Such systems should be thoroughly evaluated. Surfaces must be well cleaned of organic rust inhibitors prior to grease application to insure proper lubrication. Braycote Micronic 700 is not recommended for use in applications under high vacuum with loads exceeding 100,000 psi for extended periods of time.
Removal of unwanted grease from grease applied surfaces:
The composition of this product is a mixture of small PTFE particles (which won't dissolve in anything) and a perfluorinated polyether liquid. We have found that Castrol® Fluoroclean™ HE is an effective solvent for the liquid component of the formulated composition and aids in the removal of the grease from places where it is no longer needed or wanted.
Packaging:
Braycote Micronic 700 is packaged in 2 oz (AVDP) disposable polypropylene syringes.