Crystalbond Stripper for 590-S Mounting Adhesive 1lb (454g) (Dangerous Good)
| Availability | Contact for Availability |
|---|---|
| Item | 05139-AB |
This stripper is an environmentally-safe, water-dispersible, powder concentrate prepared primarily for use with Crystalbond™ 590 and other mounting waxes. In addition to its ability to dissolve waxes, it can be used for the removal of silicones, greases, oils, soils, finishing compounds and normal contaminants.
Features:
- Soluble in Water
- Non-Reactive with Metals
- Biodegradable
- Nonflammable
Usage
Add 6-8 ounces of 590-S (170-225 grams) to each gallon of water and allow to dissolve completely. Heat solution to 50-70 °C and immerse parts for a minimum of 5 minutes until the Crystalbond™ 590 dissolves. Use an ultrasonic system for best results. As adhesive residue begins to concentrate in the stripper, 20% of the stripper should be replaced with fresh material. Refer to process diagram for cleaning.
Rinsing
After removing the adhesive, a step-wise, warm-rinsing process is recommended. Rinse in a dilute, non-ionic surfactant or liquid detergent system, followed by a final rinse in de-ionized water to eliminate water spots due to hard salts and contaminant redeposition.
Compatibility
The 590-S is non-reactive with ceramics, glass and metals such as aluminum, brass, copper, iron, magnesium, silicon, and zinc. It is reactive with strong acids.
Handling and Storage
The 590-S is biodegradable and inert. It is a caustic material, so the use of gloves and eye goggles is recommended. Keep container tightly closed and store in a cool, dry, well-ventilated area or cabinet. Isolate from incompatibles such as strong acids.
Storage conditions: Room temperature
Also, isolate from incompatibles such as corrosives, oxidizers, or strong reducing agents.