Victawet 35B Surface Release Agent for Electron Microscopy, 500g, CAS #683343-20-7;141-65-1

Victawet 35B Surface Release Agent for Electron Microscopy, 500g, CAS #683343-20-7;141-65-1
Victawet 35B Surface Release Agent for Electron Microscopy, 500g, CAS #683343-20-7;141-65-1
AvailabilityItem Not Available
Item02470-RA
Dangerous Goods

Victawet® 35B Surface Release Agent for Electron Microscopy, 500g, CAS #683343-20-7;141-65-1

Victawet® 35B Surface Release Agent for Electron Microscopy, 45 Pound Pail, CAS #683343-20-7;141-65-1

Victawet 35B is a non-foaming anionic wetting agent used in neutral or alkaline systems where superior wetting end low foaming characteristics are desired. It is used as a dye leveling agent, lubricant, surfactant, and as an anti-wear agent in aqueous fluid systems.

 

Technical details:

  • Description:Victawet 35B is a non-foaming, anionic wetting agent available as a 70% paste
  • Formula:Na2(RO)2P2O6; R is a medium-chain aliphatic group
  • Color:Light tan to white paste
  • Appearance:Soft paste
  • Specific gravity (apparent):1.17 @ 25°C
  • Solids content, Wt. %68-72
  • Surface tension:26.2 dynes/cm2 (0.2% solution @ 27°C)
  • 5% water solution:Turbid
  • Draves Test:10 seconds at 0.28% solution
  • pH:6.9 - 7.4 (0.5% solution)
  • Solubility:Soluble in distilled water, red oil and ethylene glycol.
  • Disperses in hard water:5% NaOH, toluene, corn oil, cottonseed oil and alcohol
  • Insoluble in:5% H2SO4, 5% Na2SO4, mineral oil, mineral spirits, kerosene, CCl4, ethyl acetate, ethyl ether and aniline

 

Documents