SPI Supplies Brand PTFE Test Tubes, Conical Bottom with Screw Cap

SPI Supplies Brand PTFE Test Tubes, Conical Bottom with Screw Cap, 110mmx16mm, 13 ml

Volume	13 ml
Item	02080-AB
Availability	Item Not Available

SPI Supplies Brand PTFE Test Tubes, Conical Bottom with Screw Cap, 120mmx18mm, 18 ml

Volume	18 ml
Item	02103-AB
Availability	Item Not Available

SPI Supplies Brand PTFE Test Tubes, Conical Bottom with Screw Cap, 150mmx25mm, 45 ml

Volume	45 ml
Item	02130-AB
Availability	Item Not Available

Product Details

The SPI Supplies Brand PTFE Test Tubes are manufactured from pure virgin PTFE for maximum consistency and homogeneity which results in a "super-smooth" internal surface finish. The PTFE test tubes are inert and usable to 280°C.

Why PTFE test tubes?
Simply put, contaminants can be leached out of glass and then detected in one's samples with many of today's modern instruments of analysis. Leaching has occurred from time immemorial, of course, but it is only in the relatively recent past that these trace impurities could be detected. However, if PTFE test tubes are used, one can avoid completely this potential problem.

Choose from one of the options available: A round or a conical bottom, both are available with or without a screw cap.

Height and Diameter measurements are external or outer diameter.

Part #	Volume	Height	Diameter	Screw Cap	Bottom Shape
01936-AB	8 ml	100 mm	12 mm	No	Round
01937-AB	17 ml	100 mm	18 mm	No	Round
01938-AB	50 ml	100 mm	25 mm	No	Round

02043-AB	8 ml	100 mm	12 mm	Yes	Round
02044-AB	17 ml	100 mm	18 mm	Yes	Round
02045-AB	50 ml	100 mm	25 mm	Yes	Round

02074-AB	13 ml	110 mm	16 mm	No	Conical
02077-AB	18 ml	120 mm	18 mm	No	Conical
02013-AB	45 ml	150 mm	25 mm	No	Conical

02080-AB	13 ml	110 mm	16 mm	Yes	Conical
02103-AB	18 ml	120 mm	18 mm	Yes	Conical
02130-AB	45 ml	150 mm	25 mm	Yes	Conical