| Plastics |
| PVC (rigid) | [Polyvinyl chloride] | No effect from exposure |
| LDPE | [low density polyethylene] | No effect from exposure |
| HDPE | [high density polyethylene] | No effect from exposure |
| PP | [polypropylene] | No effect from exposure |
| Phenolic | | No effect from exposure |
| Nylon | [polyamide] | No effect from exposure |
| PET | [polyethylene terephthalate] | No effect from exposure |
| PTFE | [polytetrafluoroethylene] | No effect from exposure |
| Epoxy | | No effect from exposure |
| PPS | [polyphenylene sulfide] | No effect from exposure |
| PS | [polystyrene] | Should be tested before use |
| PC | [polycarbonate] | Should be tested before use |
| ABS | [acrylonitrile butadiene styrene] | Should be tested before use |
| Acrylic | | Probably not suitable |
| PPO | [polyphenylene oxide] | Should be tested before use |
Elastomers: |
| T (Thioko®) | [polysulfide rubber] | Should be tested before use |
| CSM (Hypalon®) | [chlorosulfonated polyethylene] | Should be tested before use |
| FKM (Viton® fluoroelastomer) | [fluoroelastomer] | Should be tested before use |
| NBR | [nitrile rubber] | Should be tested before use |
| NR | [natural rubber] | Should be tested before use |
| IIR | [butyl rubber] | Should be tested before use |
| CR (Neoprene®) | [chloroprene rubber] | Should be tested before use |
| EPDM | [ethylene propylene diamine] | Should be tested before use |
| U | [urethane rubber] | Probably not suitable |
| Q | [silicone rubber] | Probably not suitable |
Metals: |
| Al | Aluminum | No effect |
| Cu | Copper | No effect |
| Mg | Magnesium | No effect |
| P | Phosphorus | No effect |
| Al | Silver | No effect |
| Sn | Tin | No effect |
| Zn | Zinc | No effect |
| Stainless Steel | No effect |
| Steel | No effect |
| Nickel Silver Alloy | No effect |
| Brass | No effect |